Updated November 2026

A well-chosen end table should sit at roughly the same height as the arm of the sofa or chair beside it, usually somewhere between 22 and 26 inches. If you already know the height of your seating, you can pick the right table in a few minutes. This guide shows you how to measure, what to compare, and how to avoid the most common fit problems. Most people who ask how tall should end table be are really asking how to keep a drink, lamp or remote within easy reach.

Start With the Height of Your Sofa or Chair Arm

The arm is your reference point, not the seat cushion. Measure from the floor to the top of the arm on the side where the table will sit. Then compare that number to the table’s height, and aim for a difference of no more than about 2 inches in either direction. A table that is a bit lower than the arm is easy to reach. A table that is a bit higher can work if it is at least a few inches away from the arm, but it will look less balanced.

Shopping for one? See our guide: 6 Best End Tables for Living Room (2026): Expert Picks.

Measure the Space and Set Your Target Range

Once you have the arm height, use it to set a target. Common end table heights fall into a few bands:

  • Under 20 inches: Low profile, suits low sofas, sectionals and mid-century styles.
  • 20 to 24 inches: Works with most standard sofas and armchairs.
  • 24 to 28 inches: Suits tall-armed sofas, recliners or high-back chairs.

Also check the clearance between the table and the seat. You want at least 6 to 8 inches of open space between the table top and the sofa arm so you can slide a hand in without bumping it.

Check the Table Against Your Seating and Lamp Height

An end table should suit everything that sits on it. Lamps are the usual complication. A table lamp typically needs the table top to be at least 20 inches high for the shade to clear your head when you sit. If you plan to use a lamp, choose a table in the upper part of the range, and check that the shade will sit at or just above eye level when you are seated. For more on sizing side pieces in general, see Side Table vs End Table: Which Should You Choose?.

Compare Options Before You Buy

Use this quick reference to match heights to common seating:

Seating arm height Suggested end table height Notes
18 to 22 inches 18 to 22 inches Low sofas and loveseats
22 to 26 inches 22 to 26 inches Most standard sofas and armchairs
26 to 30 inches 24 to 28 inches Tall-arm recliners and high-back chairs

For a sense of how height fits into the wider room, the guide to Ideal Coffee Table Height: How Tall Should Yours Be? covers the matching logic for the central table, and What Is the Average Coffee Table Height? Standard Sizes and How to Measure lists typical measurements.

Steps to Measure and Choose Your End Table

  1. Measure the floor-to-arm height of the seat where the table will go.
  2. Subtract 0 to 2 inches to find your target table height.
  3. Measure the gap you have between the seat and the wall or other furniture.
  4. Decide whether you need room for a lamp, and add its height to your plan.
  5. Compare candidate tables against your numbers before ordering.

Common Mistakes

  • Measuring the seat cushion instead of the arm.
  • Choosing a table that is much taller than the arm, which looks awkward and makes items hard to reach.
  • Forgetting that a lamp needs extra height above the table top.
  • Ignoring how much floor space the table will take up when you pull the sofa out.

A simple tape measure and a notepad are all you need for the measurements above. A small felt or rubber furniture pad set also helps protect floors once the table is in place. Search for a View on Amazon for the measuring step, and View on Amazon to protect floors under the table legs.

FAQ

How tall should an end table be next to a sofa?

Aim for a table height within about 2 inches of the sofa arm height, which usually lands between 22 and 26 inches for standard sofas.

Can an end table be taller than the sofa arm?

It can, but a table more than 2 inches above the arm can look unbalanced and may be harder to reach from the seat.

Does a lamp change how tall an end table should be?

Yes. Choose a taller table so the lamp shade sits near eye level when you are seated, and confirm the lamp height before buying.

Conclusion

Measure the arm of the seat beside the table, then aim for a table height within about 2 inches of it. Add room for a lamp if you plan to use one, and check the gap between the table and the seat. With those numbers in hand, you can pick an end table that feels comfortable every time you reach for it.

Claire Whitaker

About Claire Whitaker

Claire Whitaker is part of our editorial team and reviews and edits our living-room tables guides, checking product details against manufacturer specifications and owner feedback.