how to make a black pipe coffee table

Creating a Black Pipe Coffee Table: Step by Step Guide

Gathering your Materials

Gathering the right materials is key to making a great black pipe coffee table. You will need:

• 1 inch diameter black pipe
• Wood board of your desired size
• Set of four metal plates
• Screws
• Pipe flanges
• Plastic caps
• Power drill
• Tape Measure
• Pencil
• Sandpaper

Constructing the Table

Once you have gathered all the materials you need, you can begin to construct your table.

1. Use the tape measure to measure the length and width of your wood board and mark it using the pencil
2. Sand the wood board and all the materials you will use for constructing the table frame
3. Drill pilot holes for the screws in the wood board and in the metal plates
4. Attach the metal plates to the wood board using the screws
5. Attach the black pipe to the flanges and then attach to each of the metal plates using screws
6. Secure the plastic caps to the ends of the pipes

Final Touches

You are almost done! To finish your black pipe coffee table, you need to do a few final touches

• Sand the edges of the pipes and plates
• Paint or stain the pipes and the plate as desired
• Finish with a protective sealant

Your black pipe coffee table is now finished and ready to be enjoyed!