Instructions on How to Assemble Your Glass Coffee Table
Getting a new glass coffee table is very exciting, but knowing how to assemble it can be daunting. Follow these simple steps to ensure your table is safely and properly assembled:
Tools Required
- Your furniture assembly instructions
- Adjustable wrench or screwdriver
- Measuring tape
Step 1: Place the Sandwich Plates
- Lay out the long-half (bottom piece) and short-half (top piece) of the sandwich plate on a flat, clean surface.
- Confirm the edges of the half-pieces overlap.
- Turn the plates over so the rounded sides face up.
- Attach the collar screw and nut to the center of the sandwich plate.
Step 2: Place the Base
- Lay out the four base pieces flat on the surface again.
- You should be able to see four small slots at each corner of the base.
- Check the base is perfectly square by measuring the diagonals.
- If it is not square, adjust the pieces until it reaches the desired size.
Step 3: Attach Sandwich Plate to the Base
- Put the sandwich plate onto the base.
- Align the slots on the sides of the sandwich plate with those on the base.
- Make sure the two halves of the sandwich plate are flat against the surface.
- Tighten the collar screw and nut to secure the pieces together.
Step 4: Place the Glass Top
- Carefully set the glass top onto the completed base.
- Check that all four sides lay flat against the surface.
- Secure the glass top to the base with the four plastic caps.
- Use the screwdriver or adjustable wrench to tighten the caps.
Conclusion
By following these simple steps, you can quickly and safely assemble your glass coffee table. Enjoy your new piece of furniture and be sure to use caution when handling the glass top!
